Swimming Pool Facilities



Rear support for springboards made of stainless steel

Rear support for springboards made of stainless steel

€2,270.90
(tax incl.)
The very robust repository made of 40mm square solid material is low-noise and stored in plastic. Specifications: Drill hole spacing for ground fixation: 150 x 600 mm Drill hole spacing for board screws: 120 + 120 + 120 mm Material: Stainless steel V4A (1.4571) Triple powder-coated RAL 7015 Slate Gray
Add to cart
Add to cart
Tennis umpire chair Court Royale Deluxe

Tennis umpire chair Court Royale Deluxe

€587.90
(tax incl.)
The tennis umpire's chair is equipped with wide and non-slip steps, in which small grooves are incorporated to ensure a good grip. Various safety measures have been taken to ensure that the umpire's chair stands securely on any surface. The seat shell is made of high-quality plastic. In addition, the weather-resistant writing surface serves as a safety factor and armrest. The chair is absolutely UV and weather resistant, and easy to clean. Specifications: Aluminum natural Seat shell made of red plastic Total height 221 cm Seat height 185 cm Width 76 cm Extension 150 cm Seat shell (W x H x D) 35 x 40 x 40 cm
Add to cart
Add to cart
BENZ access stairs in ground sleeves

BENZ access stairs in ground sleeves

On demand
(tax incl.)
BENZ access steps for height-adjustable lifting floor made of stainless steel (material 1.4301), with ground surface. To be hung on the pool edge in ground sleeves set in concrete. The stairs are adapted to the structural conditions (pool head) and are removable. Height adjustment from -30 cm to -180 cm, mounted on plastic rollers, stair width 100 cm, nubbed steps, 30 cm deep.
Details
View details  
Wellenkiller Leine Jumbo

Wellenkiller Leine Jumbo

Meter from 962,94 €
(tax incl.)
Wave Killer Line Jumbo. The floating elements are made of polypropylene and are resistant to UV rays and weathering. Each wave-breaking element is equipped with a fixed float. Both ends of the line start with 5 m of red breakwaters, followed by blue and white ones alternating over a length of 37 cm each. Black elements are placed every 15 m, the middle is marked with red elements. The competition lines are produced in accordance with the applicable regulations and accident prevention provisions of the FIN / FINA rules.
View all variants
Add to cart
Dampers for water springboard

Dampers for water springboard

Set from 1.759,90 €
(tax incl.)
This springboard damper unit with oil pressure damper ensures significant noise reduction. It intercepts the springboard before it hits the roller. The noise problem on impact is significantly reduced (up to 87 %). The damper unit is rustproof and can be easily retrofitted under any springboard (GRP). The springboard, roller adjustment and end bearing are protected. The delivery consists of damper, damper block and counter plate. The supplied reinforcement plate (counter plate) is fitted underneath the springboard so that the damper head cannot cause any damage to the springboard. Height of the entire unit approx. 175 mm + 10 mm counter plate.
View all variants
Add to cart
Diving Board

Diving Board

Piece from 4.789,90 €
(tax incl.)
The GRP springboards consist of a specially developed glass fibre structure. As a result, the springboards are characterised by exceptional and highly flexible jumping behaviour. They are also characterised by their longevity, despite the high demands placed on the diving boards during jumping. This is the result of high quality requirements and the high standards in the production process of the springboards. The 50 cm wide fibreglass diving boards are absolutely chlorine-resistant, highly elastic and weatherproof. The diving boards comply with the requirements of DIN EN 13451-10 and the anti-slip properties of the diving board treads have been tested in accordance with DIN 16165 Annex A.
View all variants
Add to cart
Hourglass 15 minutes

Hourglass 15 minutes

Piece from 18,90 €
(tax incl.)
Hourglass with red sand, (B x T x H) 5.5 x 32 x 3.5 cm, about 270 g, glass, wood bogies, running time tolerance +/- 2 minutes hourglass 15 min.
View all variants
Add to cart
Plastic bench (W x H x D) 150 x 49 x 49 cm

Plastic bench (W x H x D) 150 x 49 x 49 cm

Piece from 615,60 €
(tax incl.)
The single-sided plastic bench is a multifunctional hygiene product specially designed for use in extreme conditions, both outdoors and indoors, such as wet areas. The bench is hinged to provide storage space for materials. Details: Dimensions(W x H x D) 150 x 49 x 49 cm Hinged with storage space One side Made of sturdy PVC material Antibacterial hygiene protection Maximum load 400kg / m² Temperature resistant from -40 ̊C to +80 ̊C Available in six colors Delivery carriage forward from manufacturer. Custom-made - No return or cancellation possible.
beige blue Red yellow turquoise Gray
View all variants
Add to cart
Schwall bucket with mounting bracket

Schwall bucket with mounting bracket

€483.90
(tax incl.)
Schwall bucket headband, Ø below 240 mm, diameter top 300 mm, about 5.7 kg headband (W x H x D) 350 x 100 x 350 mm, pull chain length 700 mm, volume 10 L, water level 1.5 to 7.5 L, with adjustable floating valve, wood / metal / plastic, for wall or ceiling mounting, quick coupling 1/2 "(12.7 mm) for water inlet by means of pressure hose
Add to cart
Add to cart
Clock waterproof

Clock waterproof

€127.90
(tax incl.)
Clock waterproof, Ø 310 mm, depth 55 mm, 720 g, plastics / glass / metal, suitable for Steam room, shower and wet space
Add to cart
Add to cart